About us

Underfloor heating cable sold by heat A room is a product sold internationally since 1990. Undertile heating uses thin heating cables (1 to 1.5mm in diameter) so that once installed does not alter the floor level. The cables have been produced using the best materials that can be used in the manufacture of heating cable namely teflon and copper.

Our cable meets and exceeds the very stringent IEC 60800 standard and mechanical strength “class A”.
The undertile heating cables are laid directly under the tiles so heat transfers very quickly. The flexibility of the system allows the placement of heaters in strategic spots such as around snooker tables, U-shaped passageways or quarter-round baths.

In bedrooms and bathrooms the heaters are fully spread to prevent cold spots which are so unpleasant. Due to the very close contact between the element and the tiles, the heat response is very fast, consequently running costs are kept to a minimum. Just set the thermostat to the desired temperature and feel the luxurious warmth radiating up within 40 minutes.